Centaur (78″) – Additional Wood Pack

If you like traditional building and vintage style aeroplanes then this 78” (1980 mm) sports-coupe design by Peter Allanson will fit the bill with its 4-functions and will suit .70-size four-stroke engines. The 2 large sheet plans are well detailed, and a laser wood pack is also available to aid construction. Centaur is a high wing cabin monoplane of semi-scale appearance with elliptical wings and stabs. It would look better if the windscreen went up into the wing leading edge and if it had wing struts, but these features were omitted because Piper Cub type windscreens are difficult to do properly, and also because it is not a scale model. While it is not a difficult model to build or fly, it does require some experience in scratch building. The model was first flown in January 2011 and, at the time of writing, is still going strong. Conditions for the first flight were not ideal, the wind being fairly strong and gusty, and 90 degrees to the runway, but as we fly off a turf farm, wind direction is not a serious problem. Very little trim change was required; just two clicks right aileron and two clicks down elevator, and that was it. With further flights under better weather conditions, it was found that the model is surprisingly aerobatic. Rolls are fairly axial, will hold inverted without a problem, spins very well, and does very good stall turns. Power with a Laser 70 is adequate; it will cruise around at half throttle. It is not necessary to fly continuously at full throttle, and possibly because of this, overheating has never been a problem despite the fact that it can get pretty warm here in South East Queensland. What’s in an Additional Wood Pack? – Our Additional Wood Packs contain MOST of the necessary sheet and strip wood needed to complete a model being built from a Sarik Hobbies plan and using the associated laser cut wood pack, if available. We stock a wide range of balsa, ply and spruce in popular sheet and strip sizes but even so we cannot guarantee to be able to supply all the wood necessary to complete each model. So some additional purchases may be required from other modelling wood stockists if not available from Sarik Hobbies. Our Additional Wood Packs only contain balsa, ply and spruce wood in the stock sizes as used by our suppliers and do not include other materials that may be required to complete the model such as hardwoods, metals and GRP sheet.