Features Globe and angle configuration for flexibility in design and installation PVC and glass reinforced nylon construction Filtered pilot flow to resist debris and clogging of solenoid ports Slow closing to prevent water hammer and subsequent system damage Manual internal bleed operates the valve without allowing water into the valve box One-piece solenoid design with captured plunger and spring for easy servicing Prevents loss of parts during field service Non-rising flow control handle adjusts water flows as needed Normally closed, forward flow design Options (order separately) Accommodates optional, field installed PRS-D pressure regulating module Optional purple flow control handle for easy identification of non-potable water system PGA-NP-HAN (1” and 11 ⁄2”) PGA-NP-HAN2 (2”) Accepts latching solenoid for use with Rain Bird battery-operated controllers up to 150 psi (10.35 bar) Compatible with ESP-LXD decoders Operating Range Overview Whether the job calls for a globe or angle valve, PGA Series valves are the right choice. Loaded with features, these heavy-duty PVC valves are economical, easy to install and built to withstand constant 150 psi (10.35 bar) pressure and 2 to 150 gpm (0.45 to 34.05 m3 /h; 7.8 to 568 l/m) flows. Specifications: Pressure: 15 to 150 psi (1.04 to 10.35 bar) Flow: 2 –150 gpm (0.45 to 34.05 m3 /h; 7.8 to 568 l/m) Flow with PRS-D: 5 –150 gpm (1.14 to 34.05 m3 /h; 19.2 to 568 l/m) Water Temperature: up to 110° F (43° C) Ambient Temperature: up to 125° F (52° C) Electrical Specifications Power: 24 VAC 50/60 Hz (cycles/sec) solenoid Specs Pressure: 15 to 150 psi (1.04 to 10.4 bar) Flow without PRS-D option: 7.8 to 568 L/min Flow with PRS-D option: 19.2 to 568 L/min Water temperature: Up to 43°C - Refer to chart in photo section above Ambient temperature: Up to 52°C Electrical Specifications 24 VAC 50/60 Hz (cycles per second) solenoid power requirement Inrush current: 0.41A (9.9VA) at 60Hz Holding current: 0.14A (3.43VA) at 60Hz Solenoid coil resistance: 30-39 Ohms, nominal Dimensions 100-PGA: 18.4 cm x 14.0 cm x 8.3 cm 150-PGA: 20.3 cm x 1.,2 cm x 8.9 cm 200-PGA: 25.4 cm x 23.5 cm x 12.7 cm Note: The PRS-D option adds 5.1 cm to the valve height
