Hansen Mini Fast-Flo Valve Short Arm Pack

Features Each valve is supplied with: Complete Plastic Valve Body, Arm, Float & Long Tail Adaptor Cost-effective trough/tank valve - 29 PSI - 9 l/min Ability to attach a diffuser hose to reduce water turbulence & noise in top entry installations & Anti-Syphon Holes to prevent backflow Designed with an adjustable patent-pending "Ezi Clamp" arm to make water level adjustment a breeze Will fit multiple thread & connection combinations 15 - 50mm Reliable with high and low-pressure applications from 0.2 - 12 bar Durable urethane seat, which is reversible Suitable for top entry Manufactured from strong non-corrosive UV stabilised materials Mini Fast~Flo Installation Guide: Flush pipelines into a water tank or troughs before installing Mini Fast~Flo Valve into the new system Isolate the water going to the bowl, trough or tank to replace a valve in an existing system. Thread O-Ring end of correct size Long Tail Adaptor into Mini Fast~Flo Valve Body and tighten firmly enough that the O-Ring creates a seal against the Mini Fast~Flo Valve Body face. Do not over tighten NOTE: If there is an existing or moulded threaded inlet in the trough or tank use a Hansen Standard Adaptor. Top Entry Installation Place the ribbed side of the Rubber (soft) Washer against the hole inside the bowl/trough/tank. Insert the Long Tail Adaptor through the washer & inlet hole in the bowl/trough/tank wall. On the outside, place the Poly (hard) Washer on the Long Tail Adaptor with the ribs facing the bowl/trough/tank wall. Thread on Adaptor Nut and tighten firmly. Do not overtighten. Screw the Mini Fast˜Flo Float onto the Arm and use the Ezy Clamp to move the float to the desired position for a water level that suits your requirements.