Irritec Elbow 90° for MDPE Pipe

Features Pressure Rating: 16 Bar, 232 PSI (10 bar,145 PSI for fittings 75mm and above) Temperature Range: -10°C to 45°C (pressure rating decreases above 25°C) Connection Type: Pipe-to-pipe Certification: Watermark Certificate AS/NZS 4129: 2008 for Potable/Drinking Water Compression fitting for MDOD Pipe Fits Redline, Greenline, and Blueline MDOD pipe Compact design for easy installation Pre-lubricated O-ring for easy insertion and to prevent leaks Tee for Medium Density Polyethylene (MDPE) Pipe. Tips: Ensure that the cut end of the pipe is squared off and chamfered correctly. Loosen the nut and white grip ring and slide them onto the pipe. Push the pipe past the O-ring and into the fitting. Reinstall the nut and grip ring, tightening them by hand only. Use a suitable tool, such as multi-grips, to tighten the nut on the fitting securely. Medium Density Fittings Used for: Medium Density Pipe Blueline SKU: 2500-(OD Pipe Size)PN12-5-(Coil Length) e.g 2500-25PN12-5-100 (25mm = OD size, PN12.5 = Bar, 100 = Coil Length) Redline SKU: 360-(OD Pipe Size)PN(Bar Rate)-(Coil Length) e.g 360-63PN9-100 (63mm = OD size, PN9 = Bar, 100 = Coil Length) Greenline SKU: 370-(OD Pipe Size)PN(Bar Rate)-(Coil Length) e.g 370-32PN8-100 (32mm = OD size, PN8 = Bar, 100 = Coil Length) Tips: Medium-density pipe is referred to by its outside diameter (OD) Medium Density Fittings go overtop of MD Pipe The pipe needs to be pushed past the o-ring in the MD fitting to seal If the MD pipe is scratched or gouged, it may not create a seal on the o-ring and leak. Use tools to tighten