Crosby Carbon Eye Hook S-320CN

Description Crosby Carbon Eye Hook S-320CN is designed for overhead lifting and other rigging applications. Latch Kit sold separately. Product Features Include: The most complete line of Eye hoist hooks. Available in carbon steel. Designed with a 5:1 Design Factor for (Carbon Steel); 4.5:1 Design Factor for 30t – 60t (Alloy Steel). Eye hooks are load rated. Proper design, careful forging and precision controlled quenched and tempering give maximum strength without excessive weight and bulk. Every Crosby Carbon Eye Hook has a pre-drilled cam which can be equipped with a latch. Even years after purchase of the original hook, latch assemblies can be added. (See pages 123 – 125) Chemical analysis and tensile tests performed on each PIC to verify chemistry and mechanical properties. Type Approval and certification in accordance with ABS 2011 Steel Vessel Rules 1-1-17.7, and ABS 2007 Guide for Certification of Cranes. Hoist hooks incorporate two types of strategically placed markings forged into the product which address two (2) QUIC-CHECK® features. Failure to read the proper warning and application information may result in serious injury or death. Visit TheCrosbyGroup.com for full product warning and application information. Product Specifications       Deformation Indicators – Two strategically placed marks, one just below the shank or eye and the other on the hook tip, which allows for a QUIC-CHECK® measurement to determine if the throat opening has changed, thus indicating abuse or overload. To check, use a measuring device (i.e., tape measure) to measure the distance between the marks. The marks should align to either an inch or half-inch increment on the measuring device. If the measurement does not meet criteria, the hook should be inspected further for possible damage. Angle Indicators – Indicates the maximum included angle which is allowed between two (2) sling legs in the hook. These indicators also provide the opportunity to approximate other included angles between two sling legs.   Important Safety Information – Read & Follow Always inspect hook and latch before using. Never use a latch that is distorted or bent. Always make sure spring will force the latch against the tip of the hook. Always make sure hook supports the load. The latch must never support the load. When placing two (2) sling legs in hooks, make sure the angle between the legs is less the 90° and if the hook or load is tilted, nothing bears against the bottom of this latch. Latches are intended to retain loose sling or devices under slack conditions. • Latches are not intended to be an anti-fouling device